Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Altima Base, 3.5 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0222: TP Sensor 1 Circuit Low Input Or DTC P0223: TP Sensor 1 Circuit High Input >> DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

With CONSULT-II & GST 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode.
  3. Start engine and let it idle for 1 second.
  4. If DTC is detected, see DIAGNOSTIC PROCEDURE .
scientia non olet · About Mike's Workshop Manuals