Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 745 (Front Wiper And Washer System) >> Front Wiper And Washer System >> Preliminary Inspection >> Work Support >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2003 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "WIPER" on the "SELECT TEST ITEM" screen.
  2. Touch "WORK SUPPORT" on the "SELECT DIAG MODE" screen.
  3. Touch "WIP INT VHCL SPD ADJ" on the "SELECT WORK ITEM" screen.
  4. Touch "START".
    • Wiper intermittent speed control by vehicle speed can be canceled or resumed.
  5. Touch "CURRENT SETTING" for changing "CURRENT SETTING". For no changing "CURRENT SETTING", touch "END".
    Fig 1: Identifying Wiper Intermittent Speed Control Table
    G02024002Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "END" after customizing is completed.
scientia non olet · About Mike's Workshop Manuals