Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 394 (Engine Control System) >> DTC P1111, P1136: IVT Control Solenoid Valve >> DTC Confirmation Procedure >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00796202Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Start engine and wait let it idle for 5 seconds.
  4. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About Mike's Workshop Manuals