Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 394 (Engine Control System) >> DTC P1065: ECM Power Supply >> Diagnostic Procedure >> 4. Perform DTC Confirmation Procedure >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "SELF DIAG RESULTS" mode with CONSULT-II.
  3. Touch "ERASE".
  4. Perform DTC Confirmation Procedure. 

    See DTC CONFIRMATION PROCEDURE .

  5. Is the 1st trip DTC P1065 displayed again?
scientia non olet · About Mike's Workshop Manuals