Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1493 (Brake Control System) >> TCS/Abs >> Trouble Diagnosis For Self-Diagnostic Items >> CAN Communication System Inspection >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONNECTOR 
    1. Turn ignition switch OFF, disconnect the ABS actuator and electric unit (control unit) connector and check the terminals for deformation, disconnection, looseness or damage. If there is a malfunction, repair or replace the terminal.
    2. Reconnect connector to perform self-diagnosis.

    Is "CAN COMM CIRCUIT" displayed in the self-diagnosis display items?

    • YES: Print out the self-diagnosis results, and refer to "CAN COMMUNICATION ".
    • NO: Connector terminal connection is loose, damaged, open, or shorted.
scientia non olet · About Mike's Workshop Manuals