Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1401 (Automatic Transmission) >> DTC P1815: Manual Mode Switch >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON. (Do not start engine.)
  2. Select "MAIN SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II.
  3. Start engine.
  4. Move selector lever to "M" position.
  5. Drive vehicle for at least 2 consecutive seconds.
  6. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Identifying Display - Select System
    G02362743Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals