Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 1995 >> 240SX Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes 2.4L >> Self-Diagnostic System >> Electronic Concentrated Control System (ECCS) >> OBD-II Self-Diagnostics

OBD-II Self-Diagnostics

240SX has OBD-II self-diagnostic capabilities. Diagnostic trouble codes may be retrieved using Malfunction Indicator Light (MIL), Consult Tester or Generic Scan Tool (GST).

All models are equipped with a Data Link Connector (DLC) for use with GST. DLC is located below glove box or in glove box.

Diagnostic trouble codes are displayed as a 2-digit code using MIL. Codes displayed using Consult Tester or GST are displayed as a 5-character code. For example, Code 11 displayed by MIL is Code P0340 (camshaft position sensor malfunction) when displayed using Consult Tester or GST.

NOTE: When performing procedures in the BASIC TESTING article, be careful not to erase any diagnostic information stored in ECM memory.
scientia non olet · About Mike's Workshop Manuals