Cancel Switch Circuit (Steering Wheel)

1. Turn ignition on. Press and hold CANCEL switch. Measure voltage between cruise control module connector terminals No. 1 and 3, and terminals No. 2 and 3. See Fig 1 and Fig 2.
2. If battery voltage is present in each case, CANCEL switch circuit is okay. If battery voltage is not present in each case, check CANCEL switch wiring circuit. If CANCEL switch wiring circuit is okay, replace steering switch assembly.

Fig 1: Cruise Control Module Connector Terminal ID (16-Cavity)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Cruise Control Module Connector Terminal ID (20-Cavity)

Courtesy of NISSAN MOTOR CO., U.S.A.