DTC Confirmation Procedure

1. Turn the power supply mode of the electric motor switch to ON.
2. Keep pulling the power window switch AUTO-UP for 5 seconds or more.
3. Keep pressing the power window switch AUTO-DOWN for 5 seconds or more.
4. Select "Diagnostic Trouble Code" mode of "BCM" using scan tool (M.U.T.-III SE).
5. Check DTC.

Is DTC detected? 

YES: Refer to DIAGNOSIS PROCEDURE .

NO-1: To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO-2: Confirmation after repair: INSPECTION END