Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2024 >> Outlander PHEV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Cruise Control System) >> System Description >> Operation >> Vehicle-To-Vehicle Distance Control Mode Function >> Operation Guidance >> Warning Light And Automatic Cancellation Display

Warning Light And Automatic Cancellation Display

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
Condition Description Display on information display
  • When the ASC is turned OFF
  • When the SNOW mode, MUD mode or GRAVEL mode is selected
 A buzzer sounds and the control is automatically canceled.
NOTE: When the condition is no longer present, turn the system OFF. Turn the ACC system back on to use the system.
 Currently Unavailable
  • When the ASC operates
  • When a wheel slips
 A buzzer sounds and the control is automatically canceled.
NOTE: When the condition is no longer present, turn the system OFF. Turn the ACC system back on to use the system.
 Unavailable Slippery Road
Parking brake is applied A buzzer sounds and the control is automatically canceled.
NOTE: After releasing the parking brake, turn the system OFF. Turn the ACC system back on to use the system.
 Unavailable Parking Brake is ON
When the distance sensor is dirty, making it impossible to detect a vehicle ahead A buzzer sounds and the control is automatically canceled.
NOTE:
  • Stop the vehicle in a safe place and turn the PHEV system OFF.
  • Check to see if the distance sensor area of the front grille is blocked.
  • If the distance sensor area of the front grille is blocked, remove the blocking material.
  • After turning the PHEV system ON, press the main switch to turn the ACC system ON.
 Forward Driving Aids
Temporarily Disabled
Front Sensor Blocked
See Owner's Manual
When the system is malfunctioning A buzzer sounds and the control is automatically canceled.
NOTE:
  • Stop the vehicle in a safe place.
  • After turning the PHEV system OFF, turn the PHEV system ON again, then press the main switch to turn the ACC system ON.
  • There may be a malfunction in the system if the ACC system does not go into standby mode, or if the warning message remains on the display.
 Malfunction
See Owner's Manual


Condition Description Display on information display
  • When the ASC is turned OFF
  • When SNOW mode, MUD mode or GRAVEL mode is selected
 A buzzer sounds and the control is automatically canceled.
NOTE: When the condition is no longer present, turn the MI-PILOT Assist system OFF. Turn the system ON by pressing the main switch to use the MI-PILOT Assist system.
 Currently Unavailable
  • When the ASC operates
  • When a tire slips
 A buzzer sounds and the control is automatically canceled.
NOTE: When the condition is no longer present, turn the system OFF. Turn the ACC system back on to use the system.
 Unavailable Slippery Road
  • When the front camera unit area of the windshield is fogged up or covered with dirt, water, drops, ice, snow, etc
  • When a strong light such as sunlight and high beam from oncoming vehicle comes into the front camera
 A buzzer sounds and the control is automatically canceled.
NOTE:
  • The MI-PILOT Assist system can be used again when the condition no longer exists.
  • If the warning message continues to be displayed, stop the vehicle in a safe place, turn off the PHEV system, and clean the windshield.
 Unavailable
Low Visiblity
Parking brake is applied A buzzer sounds and the control is automatically canceled.
NOTE: The MI-PILOT Assist system will turn OFF when you release the parking brake. Turn the system ON by pressing the main switch to use the MI-PILOT Assist system.
 Unavailable Parking Brake is ON
When the driver's seat belt is not fastened A buzzer sounds and the control is automatically canceled.
NOTE: The MI-PILOT Assist system will turn OFF when the driver puts on their seat belt. Turn the system ON by pressing the main switch to use the MI-PILOT Assist system.
 Unavailable Seatbelt is Unfastened
When the MI-PLOT/distance sensor is dirty and is unable to detect the preceding vehicle A buzzer sounds and the control is automatically canceled.
NOTE:
  • Stop the vehicle in a safe place and turn the PHEV system OFF.
  • Make sure the MI-PLOT/distance sensor area of the front grille is not obstructed.
  • If the MI-PLOT/distance sensor area of the front grille is obstructed, remove the obstructing object.
  • After turning the PHEV system ON, press the main switch to turn the MI-PILOT Assist system ON.
 Forward Driving Aids
Temporarily Disabled
Front Sensor Blocked
See Owner's Manual
While the vehicle is stopped by the MI-PILOT Assist, the driver's door is opened but the electronic parking brake was not activated A buzzer sounds and the control is automatically canceled.
NOTE: Please step on the brake immediately
 Press Brake pedal
When the system is malfunctioning A buzzer sounds and the control is automatically canceled.
NOTE:
  • Stop the vehicle in a safe place.
  • After turning the PHEV system OFF, turn the PHEV system ON again, then press the main switch to turn the MI-PILOT Assist system ON.
  • There may be a malfunction in the system if the MI-PILOT Assist system does not go into standby mode, or if the warning message remains on the display.
 Malfunction See Owner's Manual
scientia non olet · About Mike's Workshop Manuals