Component Function Check

Turn ignition switch to START.

Are any cylinders ignited? 

YES >>

GO TO  2.

NO >>

Refer to DIAGNOSIS PROCEDURE .

With M.U.T.-III SE

1. Start engine.
2. Perform "POWER BALANCE" in "ACTIVE TEST" mode with M.U.T.-III SE.
3. Check that each circuit produces a momentary engine speed drop.

Without M.U.T.-III SE

1. Start engine and let it idle.
2. Listen to each fuel injector operating sound.

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Clicking sound should be heard.

Is the inspection result normal? 

YES >>

INSPECTION END

NO >>

Refer to DIAGNOSIS PROCEDURE .