Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2024 >> Outlander ES, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (1 Of 4) >> DTC/Circuit Diagnosis >> DTC P00FE: EVAP Control System >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 4 minute before conducting the next test.

    >>

    GO TO  2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait at least 1 second.
    2. Check DTC.

    Is DTC detected? 

    YES >>

    Proceed to DTC DIAGNOSIS PROCEDURE .

    NO-1 >>

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO-2 >>

    Confirmation after repair: INSPECTION END

scientia non olet · About Mike's Workshop Manuals