Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to M.U.T.-III SE display items.
| Item | Unit | Description |
|---|---|---|
| Battery voltage | V | Displays the 12V battery power supply voltage. |
| ACC voltage | V | Displays the ACC power supply voltage. |
| CONTROL MODULE MALF | On/Off | Displays the chassis control module malfunction. |
| Diag permission condition | Not permission/Permission/Abnormal/Not used | Displays the CAN network diagnosis status. |
| Chassis control malfunction display | On/Off | Displays the status of requesting to display the chassis control warning on the information display. |
| VEHICLE SPEED | km/h | Displays the vehicle speed. |
| Vehicle speed | km/h | Displays the wheel speed. |
| FR WHEEL SPEED | rpm | Displays the rotational speed of front RH tire. |
| FL WHEEL SPEED | rpm | Displays the rotational speed of front LH tire. |
| RR WHEEL SPEED | rpm | Displays the rotational speed of front RH tire. |
| RL WHEEL SPEED | rpm | Displays the rotational speed of front LH tire. |
| STEERING ANG SENSOR | deg | Displays the steering angle from the steering angle sensor. |
| DECEL G SENSOR | G | Displays the decel G. |
| Decel G | G | Displays the decel G (after correction). |
| SIDE G SENSOR | G | Displays the side G. |
| YAW RATE SENSOR | deg/s | Displays the yaw rate. |
| ACCELE PEDAL POSITION | % | Displays the accelerator pedal position. |
| PRESS SENSOR | bar | Displays the brake fluid pressure. |
| Throttle control | Normal/Abnormal 1/Abnormal 2/Abnormal 3 | Displays the electric throttle status. |
| SHIFT POSITION | - | Displays the shift position. |
| Shift position (R) | R/Not R | Displays the sift position (R) status. |
| STOP LIGHT SW | Brake pedal not operation/Brake pedal operation 1/Brake pedal operation 2/Abnormal | Displays the stop light switch status. |
| ABS | INACT/ACTIVE | Displays the ABS function status. |
| ABS MALF | On/Off | Displays the ABS function malfunction status. |
| EBD | INACT/ACTIVE | Displays the EBD function status. |
| TCS | INACT/ACTIVE | Displays the TCS function status. |
| TCS MALF | On/Off | Displays the TCS function malfunction status. |
| ASC | INACT/ACTIVE | Displays the ASC function status. |
| ASC MALF | On/Off | Displays the ASC function malfunction status. |
| ASC OFF SWITCH | On/Off | Displays the ASC function OFF status. |
| ACC brake active status | Abnormal/NO PER/PERMIT | Displays the execution status for braking function of ADAS system. |
| Yaw rate (ADAS) | Braking fully operational/Impossible to execute request/Abnormal | Displays the execution status for yaw function of ADAS system. |
| MI-PILOT Assist park | - | Displays but not used. |
| Parking brake operation status | Release/Apply/Abnormal | Displays the electric parking brake system status. |
| Stop hold (ASC) | Release/Hold/Impossible | Displays the standstill status of ASC function. |
| FR wheel speed pulse (stop hold) | - | Displays the wheel speed pulse count on hold (front RH). |
| FL wheel speed pulse (stop hold) | - | Displays the wheel speed pulse count on hold (front LH). |
| RR wheel speed pulse (stop hold) | - | Displays the wheel speed pulse count on hold (rear RH). |
| RL wheel speed pulse (stop hold) | - | Displays the wheel speed pulse count on hold (rear LH). |
| Command BR torque (IEB) 1 | - | Displays but not used. |
| Command BR torque (IEB) 2 | - | Displays but not used. |
| Brake torque request | Nm | Displays the brake torque value of active ride control. |
| Command BR torque (CCS) | - | Displays but not used. |
| Command BR torque (HPCM) | - | Displays but not used. |
| Command BR torque (ADAS) 1 | Nm | Displays the control command brake torque from ADAS control unit (Longitudinal direction). |
| Command BR torque (ADAS) 2 | Nm | Displays the control command brake torque from ADAS control unit (Turn direction). |
| Reg brake request (HPCM) | - | Displays but not used. |
| Driver brake torque request | - | Displays but not used. |
| CC/SL active status 1 | - | Displays but not used. |
| Yaw control status | - | Displays but not used. |
| Control status (ASC) 1 | Impossi/Possible | Displays the control command accept status of ASC function (Longitudinal direction). |
| Control status (ASC) 2 | Impossi/Possible | Displays the control command accept status of ASC function (Lateral direction). |
| Maintenance mode status | NOT/No req/request/Unavail | Displays the maintenance mode status. |
| Reg brake status (ASC) | - | Displays but not used. |
| Engine control status 1 | - | Displays but not used. |
| Engine control status 2 | - | Displays but not used. |
| CC/SL active status 2 | - | Displays but not used. |
| Brake active request (ADAS) 1 | Impossi/Possible | Displays the brake request accept status to ASC function from ADAS control unit. |
| Brake active request (ADAS) 2 | No Brake Request/1/2 | Displays the brake request status from ADAS control unit. |
| Brake active request (ADAS) 3 | NO REQ/REQ | Displays the brake request status from ADAS control unit. |
| Rear wheel steering status 1 | - | Displays but not used. |
| Rear wheel steering status 2 | - | Displays but not used. |
| ATC/ITC status 2 | normal/fail | Displays the intelligent trace control function status. |
| ATC/ITC status 3 | normal/fail | Displays the intelligent trace control function status. |
| ATC/ITC status 4 | normal/fail | Displays the intelligent trace control function status. |
| ATC/ITC status 5 | normal/fail | Displays the intelligent trace control function status. |
| ITC/ATC status (ENG control) 1 | - | Displays but not used. |
| ITC/ATC status (ENG control) 2 | - | Displays but not used. |
| ITC/ATC status (BR control) 1 | - | Displays but not used. |
| ITC/ATC status (BR control) 2 | - | Displays but not used. |
| IEB/AEB status 1 | - | Displays but not used. |
| IEB/AEB status 2 | - | Displays but not used. |
| ARC/IRC status 1 | normal/fail | Displays the active ride control function status. |
| ARC/IRC status 2 | normal/fail | Displays the active ride control function status. |
| Chassis control (ADAS) 1 | normal/fail | Display the chassis control module control status of ADAS control unit. |
| Chassis control (ADAS) 2 | normal/fail | Display the chassis control module control status of ADAS control unit. |
| ARC/IRC status 3 | normal/fail | Displays the active ride control function status. |
| ARC/IRC status 4 | normal/fail | Displays the active ride control function status. |
| ACC status | Off/Operation/Stop/Wait/Suspend/Brake mode/Regulation/Driver override/Malfunction | Displays the control status of ADAS system. |
| ABH warning display request | No request/Request | Displays the status of requesting to display the automatic brake hold warning on the information display. |
| ABH select status | OFF mode/STEP mode/AUTO mode | Displays the select status of automatic brake hold function. |
| ABH status 1 | Inactive/Active | Displays the automatic brake hold function status (immediately before confirmation of abnormality). |
| ABH status 2 | Inactive/Active | Displays the automatic brake hold function status (current). |
| EPB active request (ABH) | No request/Request | Displays the electric parking brake active request status from automatic brake hold function. |
| ABH stop hold request 2 | No request/Request | Displays the standstill request of automatic brake hold function. |
| ABH status 3 | No request/Request | Displays the standstill request status of MI-PILOT Assist (immediately before confirmation of abnormality). |
| MI-PILOT Assist stop hold status | No request/Request | Displays the standstill request status of MI-PILOT Assist (current). |
| EPB active request (MI-PILOT Assist) | Inactive/Active | Displays the chang request status MI-PILOT Assist to electric parking brake system. |
| ABH active request (MI-PILOT Assist) | No request/Request | Displays the standstill request status of MI-PILOT Assist. |
| AutoHold Switch Status | - | Displays the automatic brake hold status. |
| AutoHold LED Request | - | Displays the request of automatic brake hold switch indicator. |
| DRIVE MODE SELECTOR | Mode 0 - 30 | Displays the selected mode of drive mode select switch (2WD models). |
| User | - | Displays but not used. |
| Drive Mode Selector | Position 0 - 255 | Displays the selected mode of drive mode select switch (AWD models). |
| Engine/TM setting | Mode 1 - 14 | Displays the engine/transmission setting status with drive mode select switch. |
| STRG SETTING | Mode 1 - 14 | Displays the steering setting status with drive mode select switch. |
| 4WD setting | Mode 1 - 6 | Displays the AWD setting status with drive mode select switch. |
| ATC SETTING | On/Off | Displays the intelligent trace control function setting status with drive mode select switch. |
| ACC setting | - | Displays but not used. |
| Suspension setting | - | Displays but not used. |
| Keyless operation key LINK | - | Displays but not used. |
| LOG-IN PERMIS | - | Displays but not used. |
| Drive mode select switch (UP) | Not operation/Operation | Displays the "Up" operation status of drive mode select switch (2WD). |
| Drive mode select switch (DOWN) | Not operation/Operation | Displays the "Down" operation status of drive mode select switch (2WD). |