After Replacement
After replacing the ABS actuator and electric unit (control unit), the following items must be performed:
- ABS actuator and electric unit (control unit) programming
- ABS actuator and electric unit (control unit) configuration
- Air bleeding of brake fluid
- Adjust the neutral position of steering angle sensor
- Calibration of the decel G sensor
- Calibration of side G sensor
- Adjustment of rear brake caliper initialization position
- Change of system mode
- Driving 3 km (1.8 mph) or moreNOTE: Save the odometer information of combination meter in ABS actuator and electric unit (control unit).