Diagnosis Procedure

1. Turn the power supply mode of the electric motor switch to OFF.
2. Disconnect power window main switch connector and front power window switch (passenger side) connector.
3. Check continuity between power window main switch harness connector and front power window switch (passenger side) harness connector.

   Power window main switch		Front power window switch (passenger side)		Continuity
   Connector	Terminal	Connector	Terminal
   D6	5	D112	4	Existed
   	15		5

4. Check continuity between front power window switch (passenger side) harness connector and ground.

   Front power window switch (passenger side)		-	Continuity
   Connector	Terminal
   D112	4	Ground	Not existed
   	5

Is the inspection result normal? 

YES >>

GO TO  2.

.

NO >>

Repair or replace harness.

Check front power window switch (passenger side).

Refer to COMPONENT INSPECTION .

Is the inspection result normal? 

YES >>

INSPECTION END

NO >>

Replace front power window switch (passenger side). Refer to REMOVAL AND INSTALLATION .