Work Procedure

Always perform the side radar configuration after replacing the side radar.

1. SIDE RADAR CONFIGURATION 

   Perform the side radar configuration with M.U.T.-III SE. Refer to WORK PROCEDURE .

   >>

   GO TO  2.

2. SIDE RADAR ALIGNMENT 

   Perform the side radar alignment with M.U.T.-III SE. Refer to WORK PROCEDURE .

   _>>

   GO TO  3.

3. PERFORM DIAGNOSTIC TROUBLE CODE 

   Perform the Diagnostic Trouble Code of side radar with M.U.T.-III SE. Check if any DTC is detected.

   Is any DTC detected? 

   YES >>

   Perform the trouble diagnosis for the detected DTC.

   • Side radar LH: Refer to DTC Index DTC INDEX .
   • Side radar RH: Refer to DTC Index DTC INDEX .

   NO >>

   INSPECTION END