Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2023 >> Outlander ES, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (5 Of 5) >> DTC/Circuit Diagnosis >> refrigerant pressure sensor >> Component Function Check

Component Function Check

  1. CHECK REFRIGERANT PRESSURE SENSOR FUNCTION 
    1. Start engine and warm it up to normal operating temperature.
    2. Turn A/C switch and blower fan switch ON.
    3. Check the voltage between ECM harness connector terminals under the following conditions.
      ECM Voltage (V)
      Connector + -
      Terminal
      F52 74 105 0.3 - 4.5

    Is the inspection result normal? 

    YES >>

    INSPECTION END

    NO >>

    Refer to Diagnosis Procedure DTC DIAGNOSIS PROCEDURE .

scientia non olet · About Mike's Workshop Manuals