Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2022 >> Outlander ES, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Steering Control System) >> System Description >> Diagnosis System (Power Steering Control Module) >> M.U.T.-III SE Function >> Self-Diag Results Mode >> Freeze frame data (FFD)

Freeze frame data (FFD)

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

The following vehicle status is recorded when DTC is detected and is displayed on M.U.T.-III SE.

MONITOR ITEM Unit Description
Ignition switch counter (0 - 255) The number of times that ignition switch ON after the DTC is detected is displayed.
  • When "0" is displayed: It indicates that the system is presently malfunctioning.
  • When except "0" is displayed: It indicates that system malfunction in the past is detected, but the system is presently normal.
NOTE: Each time when ignition switch OFF to ON, numerical number increases in 1→2→3...38→255. When the operation number of times exceeds 255, the number do not increase and "255" is displayed until self-diagnosis is erased.
Mileage mile -
scientia non olet · About Mike's Workshop Manuals