Precaution for Harness Repair
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Solder the repair part, and wrap it with tape. [Twisted wire fray must be 110 mm (4.33 in) or less.]
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
- Never bypass the repair point with wire. (If it is bypassed, the turnout point cannot be separated and the twisted wire characteristics are lost.)
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|