Trouble Symptom Chart
WARNING: This page is about a different car, the 2020 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When you replace the camera-ECU, you should teach the camera-ECU for the multi-around monitor by writing a learned value. On completion, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to ON-VEHICLE SERVICE ).
- When you remove/install or replace the camera, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to ON-VEHICLE SERVICE ).
| Trouble symptom | Inspection Procedure No. | Reference |
|---|---|---|
| Check the camera-ECU power supply circuit. | 1 | INSPECTION PROCEDURE 1: CHECK THE CAMERA-ECU POWER SUPPLY CIRCUIT |
| No image is displayed. | 2 | INSPECTION PROCEDURE 2: NO IMAGE IS DISPLAYED |
| Any of the camera images is blue. | 3 | INSPECTION PROCEDURE 3: ANY OF THE CAMERA IMAGES IS BLUE |
| The image is not switched when the selector lever is moved to the R position. | 4 | INSPECTION PROCEDURE 4: THE IMAGE IS NOT SWITCHED WHEN THE SELECTOR LEVER IS MOVED TO THE R POSITION |
| A screen is not switched when the vehicle speed reaches a predetermined value. | 5 | INSPECTION PROCEDURE 5: A SCREEN IS NOT SWITCHED WHEN THE VEHICLE SPEED REACHES A PREDETERMINED VALUE |
| A camera image is displayed when the selector lever is moved to the R position, but it is not switched when the camera switch is pressed. | 6 | INSPECTION PROCEDURE 6: A CAMERA IMAGE IS DISPLAYED WHEN THE SELECTOR LEVER IS MOVED TO THE R POSITION, BUT IT IS NOT SWITCHED WHEN THE CAMERA SWITCH IS PRESSED |