Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2021 >> Outlander PHEV LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (MITSUBISHI Remote Control) >> Symptom Procedures >> Inspection Procedure 12: The external power supply function is not started (execution button operation is possible) >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2020 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

When the external power supply function is not started (execution button operation is possible), unsatisfied the permission condition of the external power supply function, the PHEV-ECU or the EV remote-ECU may be defective.

NOTE: This troubleshooting should be done only when the message introduced in "External discharge function message screen MESSAGE SCREEN FOR EXTERNAL DISCHARGE FUNCTION  " is displayed when the execution button of the external discharge function is pressed on the application screen.
scientia non olet · About Mike's Workshop Manuals