| PHEV-ECU power supply system |
- |
Refer to
INSPECTION PROCEDURE 1
. |
| When the brake pedal is depressed, cruise control is not cancelled. |
1 |
|
| The cruise control is not cancelled when the selector lever is moved to the "N" position. |
2 |
INSPECTION PROCEDURE 2: THE CRUISE CONTROL IS NOT CANCELLED WHEN THE SELECTOR LEVER IS MOVED TO THE "N" POSITION |
| When the CANCEL switch is pressed, cruise control is not cancelled. |
3 |
INSPECTION PROCEDURE 3: WHEN THE CANCEL SWITCH IS PRESSED, CRUISE CONTROL IS NOT CANCELLED |
| Cruise control cannot be set (No response SET - switch and RES + switch is pressed). |
4 |
INSPECTION PROCEDURE 4: CRUISE CONTROL CANNOT BE SET (NO RESPONSE SET - SWITCH AND RES + SWITCH IS PRESSED) |
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. |
5 |
INSPECTION PROCEDURE 5: HUNTING (REPEATED ACCELERATION AND DECELERATION) OCCURS AT THE SET VEHICLE SPEED |
| When the cruise control ON/OFF switch is turned ON, the cruise control display screen is not displayed (However, the cruise control system is normal). |
6 |
INSPECTION PROCEDURE 6: WHEN THE CRUISE CONTROL ON/OFF SWITCH IS TURNED ON, THE CRUISE CONTROL DISPLAY SCREEN IS NOT DISPLAYED (HOWEVER, THE CRUISE CONTROL SYSTEM IS NORMAL) |
| When the cruise control switch is operated, the system is not turned on. |
7 |
INSPECTION PROCEDURE 7: WHEN THE CRUISE CONTROL SWITCH IS OPERATED, THE SYSTEM IS NOT TURNED ON |