Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2021 >> Mirage G4 LE >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC C1396: Engine torque input refusal >> Notes

DTC C1396: Engine torque input refusal: Notes

CAUTION:
  • If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ).
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.
  • When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out the calibration of the steering wheel sensor and the G and yaw rate sensor (Refer to STEERING WHEEL SENSOR CALIBRATION  and G AND YAW RATE SENSOR CALIBRATION  ).
scientia non olet · About Mike's Workshop Manuals