»A« Gearshift Cable And Select Cable Assembly/Gearshift Link Clip/Select Cable Connection (Transaxle Side)/Gearshift Cable Connection (Transaxle Side) Installation

1. Cross the gear shift cable and the select cable as shown in the illustration and install them to the transaxle.

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

   CAUTION: Securely insert the clip, shift cable, and select cable until they click into place.
2. After installing the new gearshift link clip to the cable bracket of the transaxle, install the gearshift cable and select cable to the cable bracket.
   NOTE: The clip is reversible.

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

3. Securely fit the tips of the gearshift cable and the select cable.
4. Move the shift lever and gearshift lever to all positions and check that the operation is smooth.

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.