Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2020 >> Outlander SP, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (With Diagnostics) >> Cruise Control >> On-Vehicle Service >> Cruise Control Switch Check >> Speed-Increase Setting

Speed-Increase Setting

  1. Turn the ignition switch to the "ON" position.
  2. Push the cruise control ON/OFF switch (cruise control system: ON, cruise control display screen: display).
  3. Set to the desired speed within the range of approximately 40 km/h (25 mph) or more.
  4. Push the RES + switch.
  5. Check to be sure that acceleration continues while the RES + switch is pushed, and that the speed at the time it was released becomes the constant driving speed.
G10224418Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals