| Communication with M.U.T.-III is not possible. |
Communication with engine control module is not possible. |
- |
SYMPTOM PROCEDURES
. <2.4L ENGINE> SYMPTOM PROCEDURES
. <3.0L ENGINE> |
| When the brake pedal is depressed, cruise control is not cancelled. |
1 |
INSPECTION PROCEDURE 1: WHEN THE BRAKE PEDAL IS DEPRESSED, CRUISE CONTROL IS NOT CANCELLED |
| When the selector lever is set to "N" position, cruise control is not cancelled. |
2 |
INSPECTION PROCEDURE 2: WHEN THE SELECTOR LEVER IS SET TO "N" POSITION, CRUISE CONTROL IS NOT CANCELLED |
| When the CANCEL switch is pressed, cruise control is not cancelled. |
3 |
INSPECTION PROCEDURE 3: WHEN THE CANCEL SWITCH IS PRESSED, CRUISE CONTROL IS NOT CANCELLED |
| Cruise control cannot be set (No response SET - switch and RES + switch is pressed). |
4 |
INSPECTION PROCEDURE 4: CRUISE CONTROL CANNOT BE SET (NO RESPONSE SET - SWITCH AND RES + SWITCH IS PRESSED) |
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. |
5 |
INSPECTION PROCEDURE 5: HUNTING (REPEATED ACCELERATION AND DECELERATION) OCCURS AT THE SET VEHICLE SPEED |
| When the cruise control ON/OFF switch is turned ON, the cruise control display screen is not displayed (However, the cruise control system is normal). |
6 |
INSPECTION PROCEDURE 6: WHEN THE CRUISE CONTROL ON/OFF SWITCH IS TURNED ON, THE CRUISE CONTROL DISPLAY SCREEN IS NOT DISPLAYED (HOWEVER, THE CRUISE CONTROL SYSTEM IS NORMAL) |
| When the cruise control switch is operated, the system is not turned on. |
7 |
INSPECTION PROCEDURE 7: WHEN THE CRUISE CONTROL SWITCH IS OPERATED, THE SYSTEM IS NOT TURNED ON |