Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2019 >> RVR ES, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Ignition System) >> Crankshaft Position Sensor >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different car, the 2019 Mitsubishi Eclipse Cross. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • When removing or installing the crank angle sensor, be careful not to apply impact to the sensor.
  • Do not reuse the crank angle sensor that has been dropped.

Pre-removal and Post-installation Operation 

(Refer to CRANKSHAFT PULLEY ).

Fig 1: Removing/Installing Crankshaft Position Sensor Components With Torque Specification
G12648517Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals