Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2019 >> RVR ES, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Combination Meter) >> On-Vehicle Service >> Fuel Level Sensor Check >> Nominal Resistance Of The Fuel Level Sensor

Nominal Resistance Of The Fuel Level Sensor

WARNING: This page is about a different car, the 2017 Mitsubishi Mirage G4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel pump module (Refer to ON-VEHICLE SERVICE ).
  2. When float of the fuel level sensor is in stopper positions F and E, ensure that resistance between the fuel level sensor terminal and ground terminal is within the standard value.
    STANDARD VALUE SPECIFICATION

    Float position Gauge resistance value (Ω)
    Stopper position "F" 13.0 ± 1.0
    Stopper position "E" 120.0 ± 1.0
  3. When the float is moved slowly between stopper positions "F" and "E", ensure that the resistance is smoothly changing.
Fig 1: Testing Resistance Between Fuel Level Sensor Terminal And Ground Terminal
G11280990Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals