Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2019 >> RVR ES, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Active Stability Control System (ASC)) >> Diagnosis >> Actuator Test Table >> Notes

Actuator Test Table: Notes

WARNING: This page is about a different car, the 2017 Mitsubishi Mirage G4. However, it is still accessible from the selected car via links, so may be relevant.

Using scan tool (M.U.T.-III), the following actuators can be forcibly operated:

NOTE:
  • ABS, TCL and ASC are operated by ASC-ECU.
  • When ASC-ECU is disabled due to the fail-safe function, the actuator test cannot be performed.
  • The actuator test can be performed only when the vehicle is stationary.
  • After the actuator test has been performed, the brake warning light, ABS warning light, ASC indicator light and ASC OFF indicator light illuminate until the ignition switch is turned to "ON" again or the communication between scan tool (M.U.T.-III) and ASC-ECU is terminated.
scientia non olet · About Mike's Workshop Manuals