Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2018 >> Mirage ES, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Accelerator Pedal >> Installation Service Point >> >>A<< Accelerator Pedal Arm Stopper Installation

>>A<< Accelerator Pedal Arm Stopper Installation

  1. Insert the accelerator pedal arm stopper straight into the stud bolt of the body.

    Shall not insert the dash pad between stopper and body panel.

  2. Install the accelerator pedal arm stopper securely by turning it clockwise until its underside contacts with the body panel.
  3. After the installation, slightly pull the accelerator pedal arm stopper by hand to check that it cannot be removed easily [appropriate holding power: 100N (22.5 pounds) or more].
scientia non olet · About Mike's Workshop Manuals