Removal And Installation

WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: When the knock sensor is replaced, initialize the learned value using scan tool (M.U.T.-III) (Refer to INITIALIZATION PROCEDURE FOR LEARNING VALUE IN MFI ENGINE ).

Pre-removal Operation

Engine Room Under Cover Front Removal (Refer to UNDER COVER ).
Oil Filter Removal (Refer to OIL FILTER REPLACEMENT ).
Oil Filter Cover Removal (Refer to OIL PAN AND TIMING CHAIN CASE ).

Post-installation Operation

Oil Filter Cover Installation (Refer to OIL PAN AND TIMING CHAIN CASE ).
Oil Filter Installation (Refer to OIL FILTER REPLACEMENT ).
Engine Room Under Cover Front Installation (Refer to UNDER COVER ).

Fig 1: Knock Sensor And Intake Manifold

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

For the removal and installation procedures, refer to WATER HOSE AND PIPE .

NOTES