Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2018 >> Eclipse Cross LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Combination Meter) >> On-Vehicle Service >> Fuel Level Sensor Check >> Nominal Resistance Of The Fuel Level Sensor

Nominal Resistance Of The Fuel Level Sensor

WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel pump module (Refer to ON-VEHICLE SERVICE ).
  2. When float of the fuel level sensor is in stopper positions F and E, ensure that resistance between the fuel level sensor terminal and ground terminal is within the standard value.

    Standard value: 

    STANDARD VALUE SPECIFICATION

    Float position Gauge resistance value (Ω)
    Stopper position "F" 13.0 ± 1.0
    Stopper position "E" 120.0 ± 1.0
  3. When the float is moved slowly between stopper positions "F" and "E", ensure that the resistance is smoothly changing.
Fig 1: Checking Resistance Between Fuel Level Sensor Terminal And Ground Terminal
G11280990Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals