Check Of Freeze Frame Data
WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
When detecting fault and storing the DTC, the ECU connected to CAN bus line obtains the data before the determination of the DTC and the data when the DTC is determined, and then stores the ECU status of that time. By analyzing each data from scan tool, the troubleshooting can be performed more efficiently. The displayed items are as the table below.
DISPLAY ITEM LIST
DISPLAY ITEM LIST
| Item No. | Item name | Data item | Unit |
|---|---|---|---|
| 1 | Odometer | Total driving distance after the diagnostic trouble code is generated | mile <except vehicles for Canada> km (or mile) <vehicles for Canada> |
| 2 | Ignition cycle | Number of times the ignition switch is turned "ON" position or "LOCK" (OFF) position after the past failure transition | Number of counts is displayed. |
| 4 | Accumulated minute | Cumulative time for current malfunction of diagnostic trouble code | min |