Trouble Symptom Chart
CAUTION:
- When you replace the camera-ECU, you should teach the camera-ECU for the multi-around monitor by writing a learned value. On completion, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to ON-VEHICLE SERVICE ).
- When you remove/install or replace the camera, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to ON-VEHICLE SERVICE ).
| Trouble symptom | Inspection Procedure No. | Reference |
|---|---|---|
| Check the camera-ECU power supply circuit. | 1 | Inspection Procedure 1: Check the camera-ECU power supply circuit. |
| No image is displayed. | 2 | Inspection Procedure 2: No image is displayed. |
| Any of the camera images is blue. | 3 | Inspection Procedure 3: Any of the camera images is blue. |
| The image is not switched when the selector lever is moved to the R position. | 4 | Inspection Procedure 4: The image is not switched when the selector lever is moved to the R position. |
| A screen is not switched when the vehicle speed reaches a predetermined value. | 5 | Inspection Procedure 5: A screen is not switched when the vehicle speed reaches a predetermined value. |
| A camera image is displayed when the selector lever is moved to the R position, but it is not switched when the camera switch is pressed. | 6 | Inspection Procedure 6: A camera image is displayed when the selector lever is moved to the R position, but it is not switched when the camera switch is pressed. |