| Communication with scan tool (M. U. T-III) is not possible. |
Communication with engine control module is not possible. |
- |
GROUP 13A, Troubleshooting - Symptom Procedures - Inspection Procedure 1 P.13A-540. |
| When the brake pedal is depressed, cruise control is not cancelled. |
1 |
|
| When the clutch pedal is depressed, cruise control is not cancelled <M/T>. |
2 |
|
| When the selector lever is set to "N" position, cruise control is not cancelled <CVT>. |
3 |
|
| When the CANCEL switch is pressed, cruise control is not cancelled. |
4 |
|
| Cruise control cannot be set (No response SET - switch and RES + switch is pressed). |
5 |
|
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. <M/T> |
6 |
|
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. <CVT> |
7 |
|
| When the cruise control ON/OFF switch is turned ON, the cruise control indicator light does not illuminate (However, the cruise control system is normal). |
8 |
|
| When the cruise control switch is operated, the system is not turned on. |
9 |
|