Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2017 >> Mirage ES, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC C1394: INCOMP. Learn Neutral (SAS) >> Notes

DTC C1394: INCOMP. Learn Neutral (SAS): Notes

CAUTION:
  • If there is any problem in the CAN bus lines, an incorrect DTC may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE .
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.
  • When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out the calibration of the G and yaw rate sensor and the steering wheel sensor (Refer to MEASURES FOR DISCHARGED BATTERY  and STEERING WHEEL SENSOR CALIBRATION ).
  • When the steering wheel sensor is replaced, always carry out calibration to make ASC-ECU learn the neutral point (Refer to STEERING WHEEL SENSOR CALIBRATION ).
scientia non olet · About Mike's Workshop Manuals