Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Hands Free Module - Lancer) >> Inspection >> Steering Wheel Voice-Control Switch Continuity Check >> Illumination Check

Illumination Check

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Apply the battery voltage to steering wheel voice control switch connector terminal No. 4 and 1, and check if the steering wheel audio remote control switch illuminates.

NOTE: Make sure that the polarity is correct.
Fig 1: Applying Battery Voltage To Steering Wheel Voice Control Switch Connector Terminal No. 4 And 1
G09630499Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals