Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2015 >> Mirage RF >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) - With Diagnostics >> Diagnosis >> Diagnostic Trouble Code Procedures >> Code No. C1396 Engine torque input refusal >> Notes

Code No. C1396 Engine torque input refusal: Notes

CAUTION:
  • If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be stored. Prior to this diagnosis, diagnose the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ).
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.
  • When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out the calibration of the steering wheel sensor and the G and yaw rate sensor (Refer to G AND YAW RATE SENSOR CALIBRATION  and STEERING WHEEL SENSOR CALIBRATION  ).
scientia non olet · About Mike's Workshop Manuals