Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2015 >> Lancer Evolution Final Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Radio & Cd Player - Lancer) >> Diagnosis >> Service Mode - Vehicles With Display Audio >> Service Mode Item >> Monitor Adjustment >> Service Data Log

Service Data Log

WARNING: This page is about a different variant/trim than selected.
  1. Select "Service Data Log" button on "Service" screen.
    Fig 1: Display - Service Screen
    G09630266Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. The error log, which is stored during a system failure (drive failure), will be displayed.
    NOTE:
    • Up to ten error logs can be stored.
    • The error logs in the list are sorted in descending order from new to old.
    • When you select "Delete" button, all of the stored error logs will be erased.
    Fig 2: Display - Data Log Button Screen
    G09630267Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
LOG INFORMATION CHART

Item Factor number Produced log
Drive 20 Log concerning focus
21 Log concerning disc type
22 Log concerning disc
25 Log concerning SEEK
26 Log concerning servo start-up
27 Log concerning power-On
28 Log concerning loading/eject operation
29 Log concerning pick-up operation
30 Log concerning state of mechanism
52 Log concerning TOC reading
HDD 1 Log concerning high temperature
2 Log concerning low temperature
Monitor 1 Log concerning high temperature
AMP 0 Log concerning connection
15 Log concerning communication