Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2015 >> Lancer ES, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle On-Vehicle Service >> On-Vehicle Service >> Transaxle Oil Level Check

Transaxle Oil Level Check

  1. Remove the filler plug and gasket.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty.
  4. Tighten the filler plug and new gasket, to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

    Fig 1: Identifying Transaxle Oil Filler And Drain Plug
    G05374019Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Transaxle Oil Filler And Drain Plug
    G06672032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals