Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2014 >> Lancer Evolution MR >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) - With Diagnostics - Lancer Evolution >> On-Vehicle Service >> Steering Wheel Sensor Calibration >> < Vehicles with TC-SST >

< Vehicles with TC-SST >

CAUTION: After the next operation has been completed, carry out the following two operations:
  • Alignment adjustment < Front >
  • Steering wheel sensor (column switch assembly) replacement, removal, installation
  • ASC-ECU replacement
  1. Update the neutral position stored in the steering wheel sensor.
  2. Reset the calibrated value of the steering angle stored in ASC-ECU.
  3. Reset the calibrated value of the steering angle stored in AWC-ECU. < Only when replace of the steering wheel sensor, removal, or installation is performed. >
CAUTION:
  • Before performing the calibration, check if the steering wheel sensor-related diagnostic trouble code is set in ASC-ECU.
  • When the diagnostic trouble code other than C121A is set, carry out the inspection according to each troubleshooting procedure.
scientia non olet · About Mike's Workshop Manuals