Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2012 >> Outlander ES >> Repair and Diagnosis >> Engine Mechanical >> Engine Intake System And Exhaust System >> Intake Manifold >> Inspection >> Intake Manifold Check < 3.0L Engine >

Intake Manifold Check < 3.0L Engine >

  1. Check for damage or cracking of any part.
  2. Clogging of the negative pressure (vacuum) outlet port, or clogging of the exhaust gas recirculation passages.
  3. Using a straight edge and feeler gauge, check for distortion of the cylinder head installation surface.

    Standard value: 0.15 mm (0.006 inch) or less 

    Limit: 0.20 mm (0.008 inch) 

scientia non olet · About Mike's Workshop Manuals