Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Mitsubishi
>>
2012
>>
Lancer SE
>>
Repair and Diagnosis
>>
Brakes
>>
Traction Control
>>
Active Stability Control System (ASC) - Lancer
>>
Diagnosis
>>
Diagnostic Trouble Code Procedures
>>
DTC U0125: G And Yaw Rate Sensor Message Time-Out Error/Message Error
>>
Probable Causes
Probable Causes
Wiring harness or connector failure for the special CAN bus lines between ASC-ECU and the G and yaw rate sensor
G and yaw rate sensor malfunction
ASC-ECU malfunction
External noise interference