Diagnostic Trouble Code Chart
WARNING: This page is about a different variant/trim than selected.
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnostic trouble code(s) associated with other system may be set. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
DIAGNOSTIC TROUBLE CODE CHART - ETACS-ECU
| DTC No. | Diagnostic item |
|---|---|
| B16A2 | Blown turn-signal light (LH) bulb |
| B16A3 | Turn-signal light (LH) short circuit |
| B16A4 | Blown turn-signal light (RH) bulb |
| B16A5 | Turn-signal light (RH) short circuit |
DIAGNOSTIC TROUBLE CODE CHART - LIN
| DTC No. | Diagnostic item | ||
|---|---|---|---|
| L0432 | RLS(1) RS adaptation error | ||
| L0434 | RLS(1) light sensor error | ||
| L0436 | RLS(1) rain sensor error | ||
|
|||