Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2011 >> Lancer ES, 4D Hatchback, Standard >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Manual Transaxle On-Vehicle Service - Except Lancer Evolution >> On-Vehicle Service >> Transaxle Oil Replacement

Transaxle Oil Replacement

  1. Remove the filler plug and gasket.
  2. Remove the drain plug and gasket, and drain the oil.
  3. Tighten the drain plug and new gasket, to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

  4. Fill with DiaQueen NEW MULTI GEAR OIL API classification GL-3, SAE 75W-80 until the level comes to the lower portion of filler plug hole.

    Quantity: 2.5 dm 3  (2.6 quarts) 

    Fig 1: Identifying Filler Plug And Gasket
    G05374019Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Tighten the filler plug and new gasket to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

    Fig 2: Identifying Filler Plug Hole And Gasket
    G06672032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals