| Communication with scan tool is not possible |
Communication with the PCM only is impossible |
- |
INSPECTION PROCEDURE 1
. |
| Auto-cruise control is not cancelled. |
When brake pedal is depressed |
1 |
INSPECTION PROCEDURE 1: WHEN THE BRAKE PEDAL IS DEPRESSED, AUTO-CRUISE CONTROL IS NOT CANCELLED. |
| When selector lever is moved to "N" position |
2 |
INSPECTION PROCEDURE 2: WHEN THE SELECTOR LEVER IS MOVED TO "N" POSITION, AUTO-CRUISE CONTROL IS NOT CANCELLED. |
| When the auto-cruise control "CANCEL" switch is set to ON |
3 |
INSPECTION PROCEDURE 3: WHEN THE AUTO-CRUISE CONTROL "CANCEL" SWITCH IS SET TO ON, AUTO-CRUISE CONTROL IS NOT CANCELLED. |
| Auto-cruise control cannot be set. |
4 |
INSPECTION PROCEDURE 4: AUTO-CRUISE CONTROL CANNOT BE SET. |
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. |
5 |
INSPECTION PROCEDURE 5: HUNTING (REPEATED ACCELERATION AND DECELERATION) OCCURS AT THE SET VEHICLE SPEED. |
| When "CRUISE" (MAIN) switch is turned "ON", "CRUISE" indicator light inside combination meter does not illuminate. |
6 |
INSPECTION PROCEDURE 6: AUTO-CRUISE CONTROL INDICATOR LIGHT INSIDE COMBINATION METER DOES NOT ILLUMINATE. (HOWEVER, AUTO-CRUISE CONTROL IS NORMAL). |