Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2010 >> Outlander ES, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Electronic Control AWD) >> Special Tools

Special Tools

WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOLS SPECIFICATION

Tool Tool number and name Supersession Application
G05105023Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

M.U.T.-III Sub Assembly
  1. Vehicle communication interface (V.C.I.)
  2. M.U.T.-III USB Cable
  3. M.U.T.-III Main Harness A (Vehicles with CAN communication system)
  4. M.U.T.-III Main Harness B (Vehicles without CAN communication system)
  5. M.U.T.-III main harness C (for Chrysler models only)
  6. M.U.T.-III Adapter Harness
  7. M.U.T.-III Trigger Harness
 MB991824-KIT
NOTE: G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
CAUTION: For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Check of the electronic control AWD (the diagnostic trouble code display, service data display, freeze frame data display, actuator test with scan tool)
G05384141Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991223 Harness set
  1. MB991219 Test harness
  2. MB991220 LED harness
  3. MB991221 LED harness adapter
  4. MB991221 Probe
 MB991223 Continuity check and voltage measurement at the AWD-ECU wiring harness connector
G06482684Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB992006 Extra fine probe General service tool
scientia non olet · About Mike's Workshop Manuals