Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle On-Vehicle Service -- Lancer >> Diagnosis >> How To Initialize CVT Learned Value >> Initialization Procedure

Initialization Procedure

  1. Move the selector lever to the "P" range and turn the ignition switch to the "LOCK" (OFF) position. Then, connect M.U.T.-III to the diagnosis connector.
  2. Turn the ignition switch to the "ON" position, and then move the selector lever to the "R" range.
  3. Depress the accelerator pedal while depressing the brake pedal. (Engine is not runnning.) Using the MUT-III, execute the clear DTC function for the CVT ECU (even if no codes are set).
    NOTE: Performing initialization of the learned value will also erase the diagnosis code.
scientia non olet · About Mike's Workshop Manuals