Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Active Stability Control System (ASC) - Lancer SPORTBACK) >> ASC Off Switch >> Inspection >> ASC Off Switch Continuity Check

ASC Off Switch Continuity Check

WARNING: This page is about a different variant/trim than selected.
  1. As shown in the illustration, connect the circuit tester to the ASC OFF switch as a single unit.
  2. Check the continuity when the ASC OFF switch is pressed and released.
    TERMINAL CONTINUITY REFERENCE

    Item When the ASC OFF switch is released (No operation status) When the ASC OFF switch is pressed
    Continuity between terminal No. 1 and No. 2 No continuity Continuity exists. (2 Ω or less)
    Continuity between terminal No. 3 and No. 4 Continuity exists. Continuity exists.
Fig 1: Checking ASC OFF Switch For Continuity
G05394717Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals