Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2010 >> Endeavor LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Specifications >> Service Specifications

Service Specifications

SERVICE SPECIFICATIONS

ITEM STANDARD VALUE LIMIT
Valve opening pressure of radiator cap kPa (psi) 93 - 123 (14 - 18) Minimum 83 (12)
Fan control module Fan control module connector voltage V
  • When the ignition switch is "ON" position.
  • Measure the harness-side connector.
Battery positive voltage -
Condenser fan motor connector voltage V
  • When the A/C switch is off.
  • Measure the fan control module-side connector.
1 or less -
  • When the A/C switch is "ON" position.
  • Measure the fan control module-side connector.
Repeat 8.2 ± 2.6 and Battery positive voltage ± 2.6 -
Thermostat Valve opening temperature of thermostat °C (°F) 88 ± 1.5 (190 ± 3) -
Full-opening temperature of thermostat °C (°F) 100 (212) -
Valve lift mm (in) 9.0 (0.35) or more -